KanEquip Locations
Call UsNew Holland H6740 Mounted
Heavy-Duty Disc Mowers H6740 Mounted
Overview:
TROUBLE-FREE CUTTING AND PEACE OF MIND
New Holland H6000 Series heavy-duty disc mowers breeze through the toughest conditions to give you a clean, even cut in less time. Discs spin up to 3,000 rpm, producing a knife tip speed of up to 187 mph to slice through dense, wet grasses, fire ant hills and gopher mounds. Sele... + Read More
Features
SMOOTH CUTTING PERFORMANCE
Three 3-point-hitch-mounted H6700 Series disc mowers feature simple and convenient operation and transport. Use them to mow fields, roadsides and around your property.
AUTOMATIC REACTION TO FIELD CHANGES
A flotation spring on H6700 mounted mowers allows for vertical cutterbar movement over field obstructions. In addition, a spring-loaded breakaway latch allows the cutterbar to swing back if it hits an immovable object in the field.
CHANGE QUICKLY FROM FIELD TO ROAD
When you’re ready to hit the road, use remote hydraulics to raise the H6700 mounted mowers to a locked vertical transport position. A removable parking jack stand and convenient onboard storage location are provided on both mounted and pull-type models.
Specifications
| H6740 Mounted | |
| Cutter Bar | |
| Cutting width ft. in. (mm) | 7' 10" (2388) |
| Cutting height in. (mm) | 0.95-3.25 (24-82.5) |
| Cutter bar tilt angle degrees | 0 to -10 |
| Cutter bar operating range degrees | +18 to -32 |
| Breakaway angle degrees | 19 |
| Cutter bar floatation | Vertical adjustable spring |
| Type cutterbar | MowMax™ cutterbar, modular, w/individual sealed reservoirs |
| Number of discs | 6 |
| Knives per disc | 2 |
| Disc cutting diameter in. (mm) | 19.7 (500) |
| Disc drive | Bevel gears in sealed modules |
| Disc speed RPM | 3,000 |
| Cutter bar gear protection | Std. ShockPRO: easy replace ShockPRO hub with a partial complement of sacrificial splines |
| Swath width, approx standard** in. (mm) | 94 (2388) |
| Swath width with optional swathboards** in. (m) | 62 (1575) includes LH & RH swathboards |
| Driveline | |
| Minimum PTO horsepower required hp (kW) | 55 (40.9) |
| Input speed RPM | 540 |
| PTO shaft spline/size required | 6-spline/ 1-3/8" |
| Driveline protection | Belt drive to cutter bar |
| Overrunning clutch | Standard |
| Belt tension | Spring-loaded tensioner with adjustment gauge |
| Hydraulics and Hitch | |
| Hydraulic circuits required | One remote |
| Minimum relief pressure required psi (bar) | 1,500 (104) |
| Hitch | Category I or II |
| Dimensions and Weight | |
| Overall width in. (mm) | 160.25 (4070) |
| Overall length in. (mm) | 50.5 (1283) |
| Height - transport position* in. (mm) | 119.5 (3035) |
| Weight, shipping lb. (kg) | 1,610 (730) |
| Weight, operating lb. (kg) | 1,460 (662) |
| Maximum transport speed | NA |
| Tires/wheels | NA |