Land Pride HRS3025

Double tap to zoom



Features Benefits
540 rpm Cat l & ll three-point mounting Adapted for service on a wide range of tractors.
Low horsepower requirements 52 Horsepower requirement for approximately 25 gpm @ 3000 PSI and 540 rpm
35 Gallon self contained reservoir with 10 micron filter Provides more than ample amounts of clean and cool hydraulic fluid for even the most demanding applications.
Steel construction on Hydraulic Tank Provides for long service life in harsh environments.
Standard reversing solenoid Allows powered implements, motors, and cylinders to be reversed for expanded range of performance capabilities.
Standard pressure relief valve Protects hydraulic system from overloads or unanticipated stalls.
Standard case drain port Enables attachment and usage with implements equipped with and requiring case drain return lines.
Standard compliment of hydraulic fittings & two 23'-9" of hydraulic hoses supplied Enables ready attachment and adaptation to a wide range of tractors and applications.
Multi-functional electronic remote tether control Enables forward and reverse continuous flow or intermittent forward or reverse flow from the tractor seat or on the ground.
Driveline connected Easy hook-up to rear PTO tractor shaft.
Oil cooler For oil cooling when necessary. Included with hand valve & solenoid valve options. Optional with no valve option.
Integral storage stands Provides for easy installation and removal from the tractor and clean and convenient long term storage.


Model HRS3025
Minimum tractor horsepower 52 hp
Maximum hydraulic horsepower output 43 hp
Pump capacity Approx. 25 gpm @ 540 rpm at 3000 PSI
PTO input speed 540 rpm
Hydraulic fluid type Mobil Fluid 424 (See for alternate fluids)
Reservoir capacity 35 Gallons
Filter type LE 10 Micron filter
Oil level check Oil fill cap with dipstick
Overload protection Hydraulic relief valve
Hitch 3-Point Cat. l & ll with clevis style lower hitch, Quick hitch adaptable
Driveline ASAE Category 2
Pressure & return hose lengths 24 Feet each
Case drain port 3/4"-16 UNF
Optional & Accessory Equipment  
Flow control Option No Valve No Cooler (Pressure relief valve provided for protection)
Option No Valve With Cooler (Pressure relief valve provided for protection)
Option Manual Operated Valve With Oil Cooler (Pressure relief is built into the valve)
Option Solenoid Operated Valve With Oil Cooler (Pressure relief is built into the valve)
Small flat face couplers Option 1/2" body size (Includes adapter for attaching to hoses with 1 5/16" threads)
Large flat face couplers Option 3/4" body size (Attach to hoses with 1 5/16" threads)
Case drain kit Option Complete with 3/4" MORB x 9/16" MJIC elbow, 23'-9" of 3/8" hydraulic hose, and one 3/8" body flat face low spill quick coupler male tip