Land Pride FPS48

Double tap to zoom



Working Widths 40" to 50"
Weight 510 lbs. Heavy construction helps penetrate ground.
2" Square frame tube Frame tubing is stronger than angle iron.
Adjustable gang angles Cutting aggressiveness can be adjusted on the front and rear up to 21 degrees.
3" x 2" Gang tube, 1" sq. gang axles, high carbon steel high carbon square axles offer great strength in punishing conditions.
16" Notched disc blades Notched blades for aggressive digging and cutting action.
3/8” Thick bearing hangers Heavy-duty hangers resist the high torque from U-bolts.
Self aligning sealed bearings Self-aligning bearings offer long life while pounding through hard ground.
Rear Roller 40 7/16" Packing width, Pivots for storage without taking spreader off unit.
Spin Spreader Deflector Allows to reduce seed dispersion width down to 48"
Seed hopper height Loading height (42") for easy of use.
Spin Spreader Restrictor Plate Allows smaller seed to be run through the spreader at a lower volume per acre.


Model FPS48
Hitch Type Pull type with optional 2" ball hitch or clevis hitch
Base Unit Weight 370 lbs.
Base Unit Weight 510 lbs. (With Spin Spreader and roller.)
Hitch Weight 170 lbs. (In transport position with roller up and 100 lbs in Spin Spreader hopper.)
Hitch Height with Tongue Level Adjustable from 15 1/2" to 31" with wheels in transport position.
Adjustable from 9 5/8" to 21 3/4" with discs sitting on the ground.
Disc Cutting Width 40" to  50"
Minimum ATV Size 350 cc
Minimum Tractor/vehicle Size 17 hp
Height 52"
Length 104"
Width 54"
Weight Load on Each Disc 46 lbs.
Number of Disc Blades 8
Disc Blade Size & Type 16" Notched
Blade Spacing 7 1/2"
Transport / Gauging Tires 13" Diameter 4 ply tubeless
Bearing Hanger 3/8" Plate
Bearing Type, 2 per Gang Self Aligning, Sealed Bearing
Gang Tube 3" x 2"
Gang Axle 1" Square high carbon steel
Disc Angle Front Gang: 0, 7, 14 & 21 degrees
Rear Gang: 0, 7, 14 & 21 degrees
Frame Construction 2" x 2" Square tubular design
Lifting Device Ratchet Jack or 12 volt Linear Actuator
12 Volt Actuator Amperage 34 amps at startup.
28 amps during normal operation.
Rear Axle pivot Type Greasable
Rear Roller Bearing Greasable
Optional Spin Spreader and Packer
Packer Roller Width 40 7/16"
Spreading Device Spin Spreader, 12V
Spreader Hopper Loading Height 42" off ground
Spin Spreader Volume/Capacity 2 cu. ft. (15 gallons) (100 lbs. Maximum capacity weight)
Wide Spread Pattern
Without Deflector
20 to 25 ft. (Actual spread pattern is dependent upon product type and condition during
Spin Spreader Deflector Diverts seed to smaller spreading width. Seed rate charts calculated at 48"
Small Seed Restrictor Restricts small seed for smaller distribution levels.
Fuse Rating 15 AMPS maximum
Start-Up Amps 4 Amps (Spreading Material)
Normal Operating Amps .5 Amps (Spreading material)
15 AMPS maximum
4 Amps (Spreading Material)
.5 Amps (Spreading material)