Kuhn EL 82-205

Double tap to zoom



Rotor Drive

On the larger EL models the rotor is driven by case hardened, forged steel gears, which are mounted on conical or double row roller bearings for maximum capacity. They run in an oil bath. The heavy-duty sealing of the lower gearcase is fitted with a metallic face seal, which provides the highest possible resistance to leaking and contamination in abrasive soil conditions.

Central Gearbox

On the bigger models, the central gearbox is cast iron and set back for reduced PTO angles. A friction slip clutch is standard for protection of the drivetrain. The EL 62 Duplex gearbox offers two speeds by inverting the gears. The Duplex gearbox with two speeds is standard on the EL 92. Two additional speeds are available as optional equipment, offering the adaptation capability to various working conditions.

Adjustable Rear Hood

TThe PTO cross and yoke and protective shear bolt are easily accessible. Access to grease the PTO cross is accomplished by loosening a few wing nuts and pulling the guard forward.


The special curved design of the Kuhn tiller “C” blades has been optimized, tested and provides chopping and mixing of plant residues, aggressive entry into hard soil while requiring less horsepower and increased crumbling of soil clouds. The EL series is fitted with six blades per flange as standard for efficient crumbling. For shallow work, L-blades can be fitted on the machine.

Depth Control

On all models, working depth is controlled by using skids or wheels. On the EL 82 and EL 92, rollers are available as an option. Crumbler rollers with a large diameter of 15” with removable bars or Packer rollers with a diameter of 19” are recommended for very wet conditions or clayey soils.


Model  EL 82-205
Maximum PTO power 85 hp (63 kW)
Minimum PTO power 51 hp (38 kW)
Central gearbox Single-speed
PTO shaft Standard 1 3/8'' - 6-spline
PTO protection Slip clutch
Rotor drive Forged steel gears
PTO speed 540 rpm
Rotor speed 212 rpm
Rotor diameter 21" (53 cm)
Number of flanges 8
Number of blades per flange 6
Number of blades 48
Maximum working depth 9" (23 cm)
Rear hood adjustable 7 pin positions
Progressive offset to the right -
Hitch Cat. 1 & 2
Depth wheels Standard
Transport Width 98" (2.49 m)
Working width 81" (2.06 m)
Approximate machine weight 1,124 - 1,697 lbs (510 - 770 kg)