- Home
- Company Profile
- New Inventory
- Pre-Owned Inventory
- Hot List
- New Equipment
- Shop Parts
- MyCNHiStore
- Service
- Specials
- Careers
- Connect
Exmark LZS749AKC604A1

Double tap to zoom

Lazer Z S-Series EFI LZS749AKC604A1
Overview:
With the Lazer Z EFI S-Series, you can choose from eight different engines, including an eco-friendly, Electronic Fuel Injection (EFI), propane option. Four UltraCut™ Series 4 cutting deck sizes are available with widths up to 72 inches. Want tough, try a 10-guage, formed and continuously seam-welded top and a 7-guage side skits. All with welded spindle mounting sites and full-floating 4-point suspension with four adjustable anti-scalp rollers. - Less
With the Lazer Z EFI S-Series, you can choose from eight different engines, including an eco-friendly, Electronic Fuel Injection (EFI), propane option. Four UltraCut™ Series 4 cutting deck sizes are available with widths up to 72 inches. Want tough, try a 10-guage, formed and continuously seam-welded top and a 7-guage ... + Read More
Get A Quote
Fields with asterisks* are required. Please email our helpful staff with any questions or comments using the contact form.
Send To A Friend
Fields with asterisks* are required. Your friend will receive an email that contains a reference to this page. Please send this email only to people you know who would be interested in this information.
Share This Product:
Features
Eco-Friendly
Reduces fuel consumption, fewer emissions and carbon footprint.
Fuel Savings
Delivers up to 25% in fuel savings.
Reduce Green House Gases
Fuel saved directly correlates to reduced harmful exhaust emissions, including green house gases.
Easy to Start
Easy start in any altitude or climate condition (no manual choke).
Engine Efficiency
Closed loop (with O2 sensor) monitors combustion and keeps engine running at optimum levels.
Sequential Fuel Injection
Delivers the precise amount of fuel and spark where needed to maximize efficiency and power.
Specifications
Equipment | |
Blade Spindles | No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 30mm (1.18")diameter spindle shaft and splined blade driver. |
Drive Tires | 24 x 12-12, Turf Master® |
Cup Holder | Standard |
Tractor Frame | Unibody, welded, heavy-duty 1.5" x 3" tubular steel. |
Steering Control | Hydraulically dampened twin levers, adjust fore and aft. Adjustable dampeners (3 positions) to customize drive responsiveness. Also adjustable to 2 height positions. |
Front Caster Tires | 13 x 6.5-6, smooth-tread, semi-pneumatic. |
Parking Brake | Lever-actuated disc brake. |
Seat | Deluxe, two-tone, bolstered suspension seat with Elastomeric Vibration Control material. Mounted on innovative Seat Isolation System that provides operator isolation in all three planes of motion as well as fore-aft slide and seat flip-up. |
Electrical | 12-volt battery with 20-amp alternator. |
Onboard Intelligence | Smart Controller |
Power Components | |
Engine Brand | Kohler® |
Engine Model | ECV749 |
Engine Displacement | 747 |
Engine Series | Command™ EFI |
Engine Type | Electronic Fuel Injected |
Engine Speed | 3,750 rpm |
Air Filter | Heavy-duty canister air filtration system |
Fuel Type | Gas EFI |
Fuel Capacity | 12-gallon (45.4-L), single fuel tank with single fill location. |
Fuel Indicator | Yes - electronic Sender |
Drive | Hydro-Drive |
Drive Description | Two Exmark exclusive Parker unitized pump and wheel motor systems with no hoses, integrated cooling fans, 1.7-quart integrated reservoir, spin-on filter and heavy-duty components. 12 cc pumps and 14. 5 cubic inch motors. |
Speed | Infinitely variable speed selection from 0-10.0 mph (16 kmph) forward, 0-6.0 mph (9.7 kmph) reverse. |
Carb Compliant | Yes |
Deck Lift | Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position. |
Safety Package | Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators. |
ROPS | 2-post foldable ROPS standard with seat belt and latch. |
PTO Engagement | MagStop electromagnetic 200-ft-lb clutch with spot brake |
Drive Wheel Release | Allows unit movement without engine running. |
Casters | .50" thick caster yoke arms. |
Decks | |
Width / Cutting Deck | 60" |
Deck Style | Floating Deck |
Deck Style Description | Full-floating UltraCut Series 4. Side discharge standard, with molded discharge chute and option to bag or mulch. |
Deck Construction | 10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 7-gauge formed and welded spindle mounting locations for improved strength and reduced weight. |
Blade Tip Speed | Approximately 18,500 fpm. |
Cutting Heights | 1.0" (2.5 cm) to 5.5" (11.8 cm) in 0.25" (0.64 cm) increments adjustable from operator's seat. |
Blades | 3 Blades at 20.50" Length |
Dimensions | |
Width | 72.8 in. (184.9 cm) |
Length | 83.1 in. (211.1 cm) |
Height | 70 in. (177.8 cm) |
Curb Weight | 1249 |
-
Dodge City, KS
1451 S 2nd Ave
Dodge City, KS 67801
(620) 225-0016
Get Directions
-
Ellsworth, KS
704 E Kunkle Dr
Ellsworth, KS 67439
(785) 472-3114
Get Directions
-
Garden City, KS
2701 W Jones Ave
Garden City, KS 67846
(620) 276-3275
Get Directions
-
Great Bend, KS
214 SW 40 Ave
Great Bend, KS 67530
(620) 792-5256
Get Directions
-
Herington, KS
595 N US-77
Herington, KS 67449
(785) 258-3707
Get Directions
-
Marysville, KS
1152 Pony Express Hwy
Marysville, KS 66508
(785) 562-2377
Get Directions
-
Ottawa, KS
3313 Nebraska Terrace
Ottawa, KS 66067
(785) 242-1463
Get Directions
-
Pratt, KS
2601 E 1st St
Pratt, KS 67124
(620) 672-2982
Get Directions
-
Salina, KS
3637 S 9th St
Salina, KS 67401
(785) 825-1300
Get Directions
-
South Hutchinson, KS
1100 Wilbeck Dr
South Hutchinson, KS 67505
(620) 662-0211
Get Directions
-
Syracuse, NE
330 17th St
Syracuse, NE 68446
(402) 269-2310
Get Directions
-
Topeka, KS
2901 NW US-24
Topeka, KS 66618
(785) 267-9200
Get Directions
-
Wamego, KS
18035 US-24
Wamego, KS 66547
(785) 456-2041
Get Directions
-
Wichita, KS
3200 W May St
Wichita, KS 67213
(316) 942-2215
Get Directions
-
Field Support Office
408 Lincoln Ave
Wamego, KS 66547
(785) 456-2083
Get Directions
© Copyright 2020 - 2021 Site by MD | EquipmentLocator.com