New Holland TD4040F

Double tap to zoom

 

Features

ENGINE

MODERN ENGINES, ECONOMICAL POWER
Powered by modern, fuel efficient four-cylinder engines, TD4040F matches proven design with the latest in engineering excellence. A spacious operator platform with a modern ergonomic control layout deliver comfort and simplicity.

SMOOTH FOUR-CYLINDER POWER
Developed to operate with minimum vibration, the four-cylinder power units of all TD4040F models have the advantage of delivering smooth power at all operating speeds. Combined with low noise, the advanced engines have a low 2300rpm rated speed to further reduce noise and vibration.

REDUCING THE ENVIRONMENTAL IMPACT
By meeting modern Tier III emission standards, increasing engine service intervals to 600 hours and offering intercooled engine efficiency, New Holland helps you reduce the ‘carbon footprint’ of your business – with no impact on your productivity.

LOW SPEED, HIGH TORQUE
The latest generation four-cylinder New Holland engines powering TD4040F tractors develop maximum torque at a low 1250rpm. Torque reserves are as high as 30%. In demanding applications, TD4040F tractors have the reserves to maintain high levels of productivity.

TRANSMISSION

HOW SLOW DO YOU NEED TO GO?
A 20x12 creep speed Synchro Shuttle transmission is available. This offers working speeds as low as 0.23mph, ideal for certain applications. All transmission have a maximum speed of 24mph as standard.

SMOOTH DIRECTION CHANGE
The Synchro Shuttle™ system makes direction changes fast and easy. There is no need to swap ratio when changing direction. The operator just uses the dedicated shuttle lever and clutch. The result? A quick speed matched change in direction.

Specifications

Model

 TD4040F
Engine  

Type

4-cycle, diesel

Make

FPT

Model

F5C

Cylinders / Aspiration

4 / Turbo charged, inter-cooled

Displacement, cu. in. (L)

195 (3.2)

Block Type

Parent Bore

Rated Speed, RPM

2300

Gross Engine Horsepower

87

PTO Horsepower

76

Torque Rise†

30%

Maximum Torque, lb.-ft. (Nm)†

259 (352) @ 1300

Emission Legislation

Tier III
Fuel, Air and Lubrication System  

Injection Pump

Bosch / rotary

Injector Type

Direct

Fuel Filter Type

Dual stage water / sediment with water sensor

Fuel Tank Capacity, gal. (L)

21.1 (80)

Air Filter Type

Dry / dual element

Service Interval

600 hours

Muffler

Right Side of Hood

Exhaust Outlet

Horizontal outlet
Transmission  

Transmission

12 x 12 Mechanical

Clutch Type / Size (Mechanical), in. (mm)

Dry, 11 (280) diameter, heavy-duty cera-metallic material

Top Speed, KPH (mph)

35.1 (22)
Electrical  

Battery, volts/cca

12 / 840

Alternator, amps

120

Cold Start Aid

Grid Heater
Front Axle  

Axle Type

FWD

Front Differential Lock

Limited Slip

Steering Angle, degrees

45
Hydraulic System  

System Type

Open center

System Pressure, psi. (bar)

2,755 (190)

Implement Pump Flow, gpm. (L/Min)

11.9(45); 16.1(61) optional

Steering & Services Pump, gpm. (L/Min)

6.8 (26)

Remotes Valves (base / optional)

2 / 3

3-Pt Hitch Lift Capacity (24” behind lift point), lbs. (kg)

3,924 (1780)
Rear PTO  

540/1000 RPM

Standard (540/540E optional)

Engagement

Hydraulic assist mechanical engagement
Approximate Weights  

FWD ROPS, lbs (kg)

5,886 (2670)
Dimensions  

Platform Type

Suspended Platform

Wheelbase FWD, in. (mm)

81.2 (2063)

Length

155.1 (3940)

Tire Track Widths

 

Front FWD, in. (mm)

46.8 - 58.4 (1189 - 1487)

Rear, in. (mm)

45.2 - 65.3 (1148 - 1659)

Min. Overall Width,** in. (mm)

63.3 (1609)

Height to Top of Rollbar,*** in. (mm)

89.6 (2277)

Height to Top of Dash, *** in. (mm)

53.7 (1365)

Height to Operator Seat, *** in. (mm)

47.0 (1194)